Are the channels cleanable from the top?
Yes, they have grates that lift out to give easy access to the trap so very easy to clean
Do you have DWG files available?
We are not in a position to give these out at this moment in time.
Do you have CAD drawings available that I can look at?
No, we currently do not have CAD drawings.
Can I cut the drain trap?
Yes you can, if you do cut the trap down you will have to use a different syphon inside the trap. 35mm & 30mm syphon breaches building regulations.
What’s the difference between AquaeGuard and AquaeSeal?
AquaeGuard is a sheet membrane set into the tile adhesive and AquaeSeal is a semi-solid and ready to use tanking membrane, which is painted on by brush. AquaeSeal is easier than AquaeGuard to install, but it is more time consuming and slightly less reliable.
What adhesive do you use with waterproofing? What’s recommended?
Cementitious powder tile adhesive (not pre mixed)
What adhesive should be used to stick down AquaeGuard?
Cementitious powder tile adhesive (not pre mixed)
What do the eforms slope to? What is their gradient?
6 – 8mm at thin end going to 22mm at the thick end. Except model B which is 22 – 30mm.
How much should the floor in my wetroom slope?
Depends on the drain but we have found about 1.5% (1:80) is adequate
Can I have under floor heating in a wetroom?
Yes you can