All Tece Flush Plates are compatible with all Tece cisterns and frames. As opposed to competitor frames that require specific plates dependant on the models. The Exception to this is any of our electronic plates, i.e. Planus electronic as this will not fit onto the slimline cistern due to the motor not fitting into the cistern [...]
A company called Toto uses a frame produced by Tece and this will accommodate the entire Tece Flush plate range. However, there are no competitor frames or cisterns (Excepting Toto) that will accommodate the Tece Frame.
There is a full range of spares available for Tece cisterns and Frames. This means if a product is faulty, it can be repaired easily without meaning having to replace the entire cistern and/or frame
There are a huge range of toilet pans that are compatible with Tece frames, from various manufactures. However, the mounting points on the Tece frame need to be considered when purchasing the toilet pan. Frame specification documents can be supplied on request. There are 2 fixing point widths on all Tece frames. These are 180mm [...]
Providing the flush plates are mounted using the correct bracket, Tece flush plates simply just clip in and out of location. The flush plates are held firmly in situ and are not likely to fall out unless the mounting bracket is damaged or faulty. This makes the products very easy to remove, clean and refit, [...]
Yes, Tece cisterns are compatible with rimless toilets.
The Tece cisterns are manufactured to EN14055 which is an international standard, and Tece units fulfil this standard. If water is splashing out of the pan, this is most likely a manufacturing problem with the pan.
Yes, Tece have developed a set of throttle controls that can be fitted into the water outlet locator cage in the bottom of the cistern. There is also a water volume outlet controller switch on the rear of the water outlet module.